Freestanding Taps

What Is a Freestanding Tap?

A freestanding tap is a floor mounted tap that rises up from the bathroom floor on a standpipe rather than fitting through holes in the bath or wall. It is designed specifically for freestanding and roll top baths that have no tap holes on the rim. The pipework runs underneath the floor or through the floor surface, which means the installation is more involved than a standard bath tap but the end result is a much cleaner, more architectural look.

How to Choose the Best Freestanding Tap for Your Bathroom?

To choose the best freestanding tap, start by confirming your water pressure, as most freestanding taps need at least 0.5 to 1.0 bar to perform properly. Then decide whether you want a bath filler only or a bath shower mixer with a handheld shower attachment. Once the practical side is confirmed, pick a style and finish that works with your freestanding bath and the rest of the room.

What Water Pressure Do I Need for a Freestanding Tap?

Most freestanding taps need a minimum of 0.5 to 1.0 bar of water pressure. Because the tap is tall and narrow, water has to travel further against gravity through a longer pipe run than a standard deck mounted tap, which means low pressure gravity fed systems can sometimes struggle. If your home runs on a gravity fed system with a cold water tank in the loft, it is worth checking the pressure or asking a plumber whether a pump is needed before ordering.

Do I Need a Bath Filler or a Bath Shower Mixer?

The difference between a bath filler and a bath shower mixer comes down to whether you want a handheld shower attachment or not. A bath filler simply fills the bath and has no shower function. A bath shower mixer does both, with a handset and hose that tucks away when not in use. If you have a freestanding bath with no overhead shower, a bath shower mixer gives you the option to rinse off without needing a separate shower, which most people find genuinely useful.

What Floor Fixing Does a Freestanding Tap Need?

A freestanding tap fixes into the floor through a standpipe that connects to the hot and cold supply pipes below. The standard pipe centre distance for most freestanding taps is 180mm to 200mm apart, and this needs to be set before any floor tiles or vinyl click flooring goes down. Getting the pipe centres wrong at this stage is one of the most expensive mistakes to fix later, so always confirm the exact measurements from the product spec with your plumber before the floor goes in.

Can a Freestanding Tap Be Fitted on a Wooden Floor?

Yes, a freestanding tap can be fitted on a wooden floor, but the method is different from a solid concrete floor. On a wooden floor the supply pipes run between the joists underneath the boards rather than being channelled into concrete. The standpipe then comes up through a hole cut in the floorboard. A plumber needs to make sure the pipes are properly secured below the floor so there is no movement at the base of the tap once it is installed and in use.

Do I Need a Plumber to Fit a Freestanding Tap?

Yes, a freestanding tap is not a DIY installation. The supply pipes need to be routed under the floor and positioned precisely before the floor finish goes down, and the tap needs to be pressure tested before everything is sealed up. Any mistake in the pipe position means lifting the floor to correct it, which is a costly job. A qualified plumber will get the pipe centres right first time and make sure everything is watertight before the floor and tiles go in around it.

Why Is the Water Flow Weak on My Freestanding Tap?

Weak flow on a freestanding tap is usually caused by one of three things. The water pressure in the home may be too low for the tap to perform properly, especially on a gravity fed system. An isolating valve under the floor may not be fully open after installation. Or debris from the pipework may have got trapped in the tap's internal cartridge during fitting. A plumber can check all three quickly, and clearing a blocked cartridge or aerator usually fixes the flow without any major work.

Why Does My Freestanding Tap Wobble?

A freestanding tap that wobbles after installation usually means the base nuts on the standpipe were not tightened enough when it was fitted. Tightening the floor shroud or securing the base nuts a little more generally fixes it. If the wobble continues, the standpipe anchoring below the floor may not be rigid enough, and a plumber will need to check the pipe fixings underneath. Do not leave a wobbling tap unaddressed, as the movement puts stress on the pipe connections and can cause a slow leak over time.

How Do I Clean a Freestanding Tap Without Damaging the Finish?

To clean a freestanding tap without damaging the finish, wipe it down regularly with a soft damp cloth and mild soapy water. In hard water areas across the South and East of England, drying the tap after each bath prevents limescale crusting on the surface. Never use bleach, vinegar, Cillit Bang, or abrasive bathroom sprays on brushed brass, matt black, or chrome freestanding taps as these strip the coating and the damage is permanent. For stubborn limescale on chrome, a product specifically designed for chrome bathroom fixtures is the safest option.